Hot Product Q376 Hanger Shot Blast Machine
Regarding to Hot Product Hanger Shot Blast Machine main technical index:
1. The size of workpiece: The Max. Size and The Min. Size of workpiece ( length, width, height )
2. What is your blasting capacity per 8 hours working time?
3. The quantity of shot blasting wheel / wheel turbines
4. The ventilation quantity of dust collector
5. The Total power of Shot Blasting Machine
Technical parameters:
We will recommend you the right machine according to the workpiece and your requirement.
Specifaction |
Size of cleaning piece |
Max, lifting height |
Total blasting capacity |
Total power |
| HSK-7Y/7S |
φ800*1100
φ700*1100 |
0.5T |
180Kg*2
7.5Kw*2 |
22-33Kw |
| HSK-9/9Y |
φ1200*1500
φ900*1600 |
1.0T |
240Kg*2
11-7.5Kw*2 |
36-45Kw |
| HSK-10/10Y |
φ1200*1500
φ900*1850 |
1.0T |
240Kg*2
11Kw-7.5*2 |
39-55Kw |
The following characteristics of hanger type shot blasting machine:
The equipment consists of lifting, shot blasting chamber, blast wheel, Abrasive /pill material circulation purification system, dust removal system and electric control system etc...The workpiece is hoisted from the outdoor side, erected and put into the shot blasting chamber, close the door and the workpiece is rotated by blast cleaning.
The hook can realize lifting up down, walking and the positive and negative rotation function and it greatly improves the effect of blasting the workpiece. The shot blasting chamber and the layout of blast wheel are determined after computer 3D simulation of dynamic ejection.
2 sets blast wheel are manufactured by ourselves which adopt American WHEELBRATER turbine hurricane technology, it has high blasting speed, single capacity of blasting is up to 170 kg/min, the blasting speed is up to 80m/s, it greatly improve the cleaning efficiency and cleaning effect. The special structure can make the utilization of abrasive maximize to 98%, common blast wheel is only 80%, in the China mainland, this technology is the most advanced one.
The separation device is BE full curtain type pill slag separator which is international most advanced one, it can significantly improve the separation effect.
It adopts connecting rod mechanical Fifth Class seal, it completely eliminates steel shot outside and the advantage is good sealing effect and long service life.
Dust removal system is two stage dust removal which is using settling chamber and needle punched felt duster, dust emission concentration is less than 90 mg/m3.
Installation:
1. Seller will send 1 engineer to buyer's factory to supervise installation, commission and training.
2. Seller will provide training to buyer's relevant employee. And seller will provide
Machine Operation and maintenance manual " and machine Electric schematic diagram"
3. Buyer will afford the visa, round trip tickets, transportation, hotel, and meals. Buyer will provide 2-4 necessary labor workers, and necessary tools, facilities and powers.
4. Buyer will pay each engineer some money per one day. The date will be countered from the date when the engineer departure from buyer's factory. All the holidays and weekends will be included. Total days about 15 days.
5. Buyer will sign on the "machine Testing and acceptance agreement" after the successful trial.
After-sales Service
1. One Year guarantee time. Easily worn parts and spare parts are not included.
2. Extended guarantee will be available basted on mutual negotiation.
3. Whole-life technical support. Any problem during using appears, will reply within 24 working hours with technical solution.
Technical support:
Wheel turbine is the key of shot blasting machine
Spare parts is very important, our spare parts are all tested by our balancing machine and blasting load tester.
Our shot blasting machine had approved ISO AND CE, directly exported EU countries and other countries.
Our some clients visited to our factory any time
FAQ
What is a shot blast machine?
A shot blaster is a machine that controls the flow or stream of fine metal beads as they are forcibly projected against a surface by mechanical acceleration.
What material is used for shot blasting?
Types of metal abrasives used in shot blasting include steel grit, copper shots, and aluminum pellets. Other methods of shot blasting use silica sand, glass beads, synthetic materials like sodium bicarbonate (baking soda), and even agricultural materials like crushed kernels.
Will shot blasting remove rust?
Shot blasting is the process of abrading the surface of a metal workpiece to remove rust, dirt and other solidified contaminants by hurling a high speed stream of tiny pieces of stainless steel that resemble buckshot. It is capable of deburring, shaping and texturing a surface.
What is the difference between sandblasting and shot blasting?
Essentially, the sandblasting process uses compressed air to shoot some form of abrasive media like sand against the product being treated. Shotblasting employs centrifugal force from a mechanical device to propel treatment media upon the product.
){kind=link}
){kind=link}